EVENT_NDIS_BAD_IO_BASE_ADDRESS, 0xC0001394
(MS WDK >> Windows Driver Kit for Windows Vista (WDK 6000))

Name
EVENT_NDIS_BAD_IO_BASE_ADDRESS
Value
-1073736812 signed int
3221230484 unsigned int
0xC0001394 heximal value
Type
Windows Lanman Server Events (more)
Description
%2 : The I/O base address supplied does not match the jumpers on the adapter.
C/C++ Type
int
Defined at
\inc\api\netevent.h, line 1499 (Windows Driver Kit for Windows Vista (WDK 6000))
Definition 
#define EVENT_NDIS_BAD_IO_BASE_ADDRESS   0xC0001394L
Line comments 
MessageId: EVENT_NDIS_BAD_IO_BASE_ADDRESS

MessageText:

%2 : The I/O base address supplied does not match the jumpers on the adapter.
Also used in
Windows Driver Kit 8.1 (WDK 8.100.26638), Windows Driver Kit 7.1.0 (WDK 7600.16385.1), Windows Driver Kit 7.0.0 (WDK 7600.16385.0), Windows Driver Kit – Server 2008 Release SP1 (WDK 6001.18002), Windows XP SP1 Driver Development Kit (DDK 2600.1106), Windows 2000 DDK (DDK 2195.1)
Type description 
Lanman Server Events (2000 - 2999)
    2000-2499 are generated by the server driver (kernel mode)
    2500-2999 are generated by the server service (user mode)

Server driver events, issued from kernel mode. 

 Values are 32 bit values laid out as follows:

  3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
 +---+-+-+-----------------------+-------------------------------+
 |Sev|C|R|     Facility          |               Code            |
 +---+-+-+-----------------------+-------------------------------+

 where

     Sev - is the severity code

         00 - Success
         01 - Informational
         10 - Warning
         11 - Error

     C - is the Customer code flag

     R - is a reserved bit

     Facility - is the facility code

     Code - is the facility's status code
MUI descriptions
DA %2 : Den angivne I/O-startadresse passer ikke sammen med jumperne på netværkskortet.
SV %2 : IO-basadressen matchar inte byglarna på nätverkskortet.
EL %2 : Η παρεχόμενη βασική διεύθυνση εισόδου/εξόδου δεν συμφωνεί με τους βραχυκυκλωτές στον προσαρμογέα.
RU %2 : указанный базовый адрес ввода-вывода не соответствует перемычкам адаптера.
PT %2 : O endereço base de E/S fornecido não corresponde aos jumpers no adaptador.
KO %2 : 제공한 I/O 기준 주소가 어댑터에 있는 점퍼와 일치되지 않습니다.
FI %2: annettu I/O-perusosoite ei vastaa sovittimen hyppykytkimiä.
ZH %2 : I/O 基本位址與介面卡上的跳接器不符。
FR %2 : l’adresse de base d’E/S fournie ne correspond pas aux cavaliers positionnés sur la carte réseau.
HU %2 : A megadott I/O-alapcím nem egyezik az adapter átkötőivel.
NL %2: het opgegeven I/O-basisadres komt niet overeen met de schakelaars op de adapter.
JA %2 : 指定した I/O ベース アドレスがアダプターのジャンパーと一致しません。
TR %2 : Belirtilen G/Ç taban adresi bağdaştırıcıdaki anahtarlarla uyumsuz.
NB %2: I/U-baseadressen stemmer ikke med den adressen som er satt på kortet.
DE %2 : Die angegebene E/A-Basisadresse stimmt nicht mit den Jumpereinstellungen auf dem Adapter überein.
IT %2: L'indirizzo I/O di base fornito non corrisponde all'impostazione dei ponticelli nella scheda di rete.
PL %2: podany adres podstawowy We/Wy nie pasuje do zworek na karcie.
ES %2 : la dirección base de E/S proporcionada no coincide con los puentes del adaptador.
CS %2 : Zadaná základní vstupně výstupní adresa neodpovídá můstkům adaptéru.
 

Neighbor error codes

 

What web knows about this

See also libs