EVENT_NDIS_HARDWARE_FAILURE, 0xC000138A
(MS WDK >> Windows XP Driver Development Kit (DDK 2600))

Name
EVENT_NDIS_HARDWARE_FAILURE
Value
-1073736822 signed int
3221230474 unsigned int
0xC000138A heximal value
Type
Windows Lanman Server Events (more)
Description
%2 : Has determined that the network adapter is not functioning properly.
C/C++ Type
int
Defined at
\inc\wxp\netevent.h, line 1493 (Windows XP Driver Development Kit (DDK 2600))
Definition
#define EVENT_NDIS_HARDWARE_FAILURE      0xC000138AL
Line comments
MessageId: EVENT_NDIS_HARDWARE_FAILURE

MessageText:

%2 : Has determined that the adapter is not functioning properly.
Also used in
Windows Driver Kit 8.1 (WDK 8.100.26638), Windows Driver Kit 7.1.0 (WDK 7600.16385.1), Windows Driver Kit 7.0.0 (WDK 7600.16385.0), Windows Driver Kit – Server 2008 Release SP1 (WDK 6001.18002), Windows Driver Kit for Windows Vista (WDK 6000), Windows 2000 DDK (DDK 2195.1)
Type description
Lanman Server Events (2000 - 2999)
    2000-2499 are generated by the server driver (kernel mode)
    2500-2999 are generated by the server service (user mode)

Server driver events, issued from kernel mode. 

 Values are 32 bit values laid out as follows:

  3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
 +---+-+-+-----------------------+-------------------------------+
 |Sev|C|R|     Facility          |               Code            |
 +---+-+-+-----------------------+-------------------------------+

 where

     Sev - is the severity code

         00 - Success
         01 - Informational
         10 - Warning
         11 - Error

     C - is the Customer code flag

     R - is a reserved bit

     Facility - is the facility code

     Code - is the facility's status code
MUI descriptions
DA %2 : Har fastslået, at netværkskortet ikke fungerer korrekt.
SV %2 : Identifierade ett problem med nätverkskortet som gör att det inte fungerar som det ska.
EL %2 : Καθορίστηκε ότι ο προσαρμογέας δικτύου δεν λειτουργεί κανονικά.
RU %2 : Обнаружено неправильное функционирование адаптера.
PT %2: determinou que a placa de rede não está a funcionar corretamente.
KO %2: 네트워크 어댑터가 올바르게 작동하지 않습니다.
FI %2: Havaitsi, että verkkosovitin ei toimi oikein.
ZH %2 : 系統認定網路介面卡的運作方式不適當。
FR %2 : a déterminé que la carte réseau ne fonctionne pas correctement.
HU %2 : Azt észlelte, hogy a hálózati adapter nem működik megfelelően.
NL %2: heeft vastgesteld dat de netwerkadapter niet goed werkt.
JA %2 : ネットワーク アダプターが正常に機能していません。
TR %2 : Ağ bağdaştırıcısının düzgün çalışmadığı belirlendi.
NB %2: Oppdaget at nettverkskortet ikke fungerer slik det skal.
DE %2 : Fehlfunktion des Netzwerkadapters wurde ermittelt.
IT %2: la scheda di rete non funziona correttamente.
PL %2: stwierdzono, że karta sieciowa nie działa właściwie.
ES %2 : se determinó que el adaptador de red no está funcionando correctamente.
CS %2 : Bylo zjištěno, že síťový adaptér nepracuje správně.